EN
- English
- 한국어
- français
- Deutsch
- Español
- русский
- العربية
- tiếng việt
- Türkçe
- ไทย
- Indonesia



Polyethylene Tape White

Name: Polyethylene Tape White
Brand: Changzhou Egret Manufacturing Co., Ltd.

Egret so-called polyethylene white tape is used a lot for refrigerators or coolers. Normally is coated with natural rubber glue or water based acrylic adhesive. Plus, it has no liner. The base material is polyethylene. The material has very high elongation rate, extremely stretchable, and easy to tear. Because of this feature, it enables to stretch and conform to irregular surfaces.

Important to realize, it normally can take place aluminum foil tape, to attach the cooling tubes. Compared to aluminum foil tape, the cost of PE white tape is lower. On the other hand, white color is easy for you to recognize. Silicon coating on the back side is easy for you to release.

Inquire Now Pdf

egret

Specifications Features Process FAQ

Polyethylene Tape White Specifications

Properties	Data	Test Method
PE Film Thickness	60 microns (2.4 mil)	PSTC-133/ASTM D3652
Glue Thickness	20 microns (0.8 mil)	PSTC-133/ASTM D3652
Peel Strength (Room Temp.)	18 N/25mm (64.8 Oz/In)	PSTC-101/ASTM D3330
Loop Tack (Steel Ball)	≥ 10 #	GB/T4852
Static Shear	≥35 Hours	GB/T4851-2014
Tensile Strength	32 N/25mm (7.3 Lb/In)	PSTC-131/ASTM D3759
Elongation at Break	600.00%	PSTC-6/ASTM D3121
Urethane Foam Bonding Rate	≥90%	ASTM D3167

Features of Polyethylene Tape White

2.4 mil (60 micron) polyethylene film with high tensile strength
With silicone coating on PE non-adhesive side for easy release
Easy hand-tear or tear-resistance is available according to customer
Flexible PE material enables to stretch and conform to irregular surfaces
PE film color can be white or blue
Coated with high performance rubber adhesive
Natural rubber, synthetic rubber/resin, water acrylic adhesive available
Rubber adhesive has good bonding, removes without residue
Cost-saving alternative for aluminum foil tape in refrigerator application
Good aging resistance for both indoor & outdoor use
PE tape without liner ensures easy operating

Products



Industrial Adhesive Tape

Aluminum Foil Tape

Pure Aluminum Foil Tape Laminate Aluminum Foil Tape Reinforced Aluminum Foil Tape FSK Tape Butyl Foil Tape Aluminum Foil Glass Cloth Tape

PET Tape

PET Blue Holding Tape

Foam Tape

VHB Foam Tape PU Foam Tape PE Foam Tape Spooled Foam Tape EPDM Foam Tape CR Foam Tape EVA Foam Tape NBR Foam Tape EPE Foam Tape Opsello Foam Tape Refrigerator Felt Pads

PE Tape

PE Stretch Film Polyethylene Tape White PE Protection Film Weather Seal PE Tape

Paper Tape

Masking Tape Kraft Paper Tape Double Sided Tissue Tape Drywall Joint Tape

Vinyl Tape

Non Adhesive PVC Tape PVC Pipe Wrap Tape Vinyl Electrical Tape

Cloth Tape

Duct Tape

PP Tape

MOPP Tape BOPP Tape PP Strapping Band

Fiberglass Tape

Mono Filament Tape Bi Directional Filament Tape Double Sided Scrim Tape

PO Film

PO Hot Melt Adhesive Film

Polyimide Tape

FAQ of Polyimide Tape



HVAC Parts

AC Pressure Switch

Auto Reset Pressure Switch Manual Reset Pressure Switch Adjustable Pressure Control

HVAC Solenoid Valve

FAQ of HVAC Solenoid Valve

Refrigeration Check Valve

FAQ of Refrigeration Check Valve

Refrigeration Ball Valve

FAQ of Refrigeration Ball Valve

AC Leak Detector

FAQ of AC Leak Detector

Solar Power Thermometer

FAQ of Solar Power Thermometer

Process of Polyethylene Tape White Tape Production

NO.1

First, we will choose 50 mic, 58 mic or 62 mic thickness polyethylene film.

NO.2

Second, we use white paint to dye the pe film.

NO.3

Third, we coat silicon on the back side of PE white film, to ensure its easy release or unwind.

NO.4

Forth, we coat with very high bond natural rubber or water based acrylic adhesives.

NO.5

Finally, we use our lathe slitting machines to cut the jumbo rolls to different standard or nonstandard width and length of small rolls. The jumbo size is 1150mmx1000m.