English
한국어
français
Deutsch
Español
русский
العربية
tiếng việt
Türkçe
ไทย
Indonesia
Inductor internal pressure when the system pressure is higher than the rated safety pressure.
The interface adopts a thread quick joint or copper pipe welding installation structure, which makes it easy to use, flexible installation, no special installation, and fixation.
The plug type or wire type connection can be arbitrarily selected by the user.
The contact structure is divided into four types: single pole single or double, normally open or normally closed, with a wide range of use. The sealed stainless-steel inductor is safe and reliable.
Note: The difference between the two pressure values must be greater than or equal to the switch before it can be turned on and off flexibly
The pressure switch is mainly for controlling the Fluid/liquid/gas/air pressure. It is widely used in air conditioning/refrigeration systems for commercial, automobile, refrigeration condensing units, heating & cooling system, air compressors, heat pumps, heat exchangers, and through wall condensers.
The pressure switch is also used for industrial commercial Dehumidifiers, humidification, ice machines, slush machines, water chiller system, sprayers, hydraulic machines, water purifiers, purification, misting, water pumps, fire pumps, fire protection alarm systems, industrial boilers, pressure washers, beauty apparatus, etc.
The pressure switch is mainly used for high and low-pressure protection and control of the household, commercial, and automobile air conditioning and refrigeration systems.
The pressure switch is can also be used for high and low-pressure protection and control of air compressors, hydraulic press, solar water pumps, and other equipment and tools.
Inductor internal pressure when the system pressure is higher than the rated safety pressure.
The force sensing disc moves instantaneously and pushes the safe disc through the transfer guide rod.
Reach the locking position, while the safety disc through the connection of the guide rod to push the switch.
The contact is disconnected.
When the pressure is reduced below the rated safe pressure, the sensor disc automatically.
Reset, because the safe disc has been in the locked position and cannot automatically reset, open.
The close contact cannot be switched on, only press the external button to force the insurance disc.
When the piece is unlocked and the switch contact is connected, the system can resume normal operation as a state.
